Über diese Seite
Archiv
Kategorien
Blogs
- "I build it" – John Heisz (CA)
- Baltic Surge – Eike (DE)
- Björn Thomasson Design – (SE)
- Cape Falcon Kayak – Brian Schulze (US)
- Dashpoint Pirates – (US)
- Fit 2 paddle – (US)
- Gnarly Dog – (AUS)
- Grönländer punkt de – (DE)
- Paddelblog – Axel (DE)
- Paddling Norway 2011 (NO)
- paddlinglight.com – Bryan Hensel (US)
- Ulf Johansson Kajak – (SE)
- Woodgears.ca – Matthias Wandel (CA)
Links
Seekajak Archive
Frej 2 – New Boat started
Happy new Year 2020 and all the best to you paddlers… Today I started the second boat using the same templates I created for the previous one. With starting the […]
Frej – getting painted…
The last weekend offered some hot and dry weather, so I took the risk and set up my paint booth outside in front of the garage. I hang the kayak […]
Frej – Glueing it togehter
Yesterday was the BIG day – I glued the boat togehter. Put all your straps and long clamps in place! Plus all your venyl gloves and trusty Duct-Tape. You will […]
Frej – Adding the hatches
Beeing a seakayak, the boat needs sections and hatches. I bought the 20cm round hatches from kayak sport. For the form parts, that carries the hatches, I followed the usual […]
Frej – Building the seat
Building a seat for someone else is a bit different from something you would choose for yourself. It‘s getting more complex if the person is still growing. My daughter is […]
Frej – Start glasing the Kayak
Tonight not only our big garden project reached a milestone (wall done, earth back in place) the Frej Kayak project also made a big step forward. BUT: Saftey first… For […]
Frej – Stripping the Deck
Sunday, 17th of March 2019 Today I started stripping the Deck! 23rd of March 2019 I am not so fast as I could be. Jobwise and Studywise there is a […]
Frej – Ordering Acessories
If you build a seakayak you might want to do multiday trips. Therefore you need access to your gear. And it is a good idea to divide the boat into […]
Frej – Stripping the Hull
After attaching the sections to the strongback, I mangaged it to put the first three strips in place! Yeah! Wednesday, 2nd of January 2019 Sunday, 6th of January 2019 I […]
Frej – Fixing the Sections onto the Strongback
Yesterday I made the cutouts with the jigsaw. I bought extra blades for cutting through aluminum but they quickly got filled op with melted aluminum. The best blades where quick […]
Frej – First glimpse of the new Boat
Today I picked up the Aluminum Profile for the strongback. I decided to go for this Out-of-the-shelf solution to save myself a lot of time. Instead of building a straight […]
Frej – How to prepare Drawings for Lasercut?
If you decide to do some cuttings utilizing a lasercutting machine you need the following: 2D CAD System that allows you to create DXF Drawings (DXF is a fileformat) Access […]